If you are serious about boating, you probably go all out to ensure that you have the best gear that money can buy. With so much time spent putting together the best gear and equipment, it can be easy to forget that something small and simple can put your boat
Read More »
Applications of Rust Bullet
Rust Bullet Application Rust Bullet Guidelines and Preparation Works Rust Bullet can be applied directly over rusted and clean metal surfaces with little or no surface preparation. To ensure you achieve the best possible results, it is extremely important that Rust Bullet Application Guidelines should be read thoroughly before use.
Read More »
Understanding Airless Spray Tips
Airless Spray Tips 101 Airless Spray Specifications and Guidelines The relationship of the tip opening (orifice) to spray pattern size is: Given a constant width (fan), the larger the orifice, the more material the sprayer will apply. Given a constant orifice size, an increasing fan width will apply a thinner
Read More »
Airless Sprayers: Spray Your Way To A Better Finish
Using Airless Sprayers Effectively A Guide on Airless Sprayers by Joe May Airless sprayers are a must for many contractors these days—and, for features and durability, the current crop of models is hard to beat. Today’s sprayers are lightweight, versatile workhorses that can deliver a wide range of high-quality finishes
Read More »
Adhesion Testing Methods
Guide on Adhesion Testing Methods How To Perform Adhesion Testing For coatings to perform satisfactorily, they must adhere to the substrates on which they are applied. A variety of recognized methods can be used to determine how well a coating is bonded to the substrate. Commonly used measuring techniques are
Read More »
Guide for Selecting One-Coat Shop Painting Systems
What are One-Coat Shop Painting Systems? Painting System Guide 7.00 – Guide for Selecting One-Coat Shop Painting Systems There are no standard one-coat shop painting systems; however, by using the following Guide a painting system may be selected by the specifier. Select the desired surface preparation and primer from those
Read More »
Guide for Selecting One-Coat Preconstruction or Prefabrication Painting Systems
One-Coat Preconstruction/Prefabrication Painting Systems Painting System Guide 22.00 – Guide for Selecting One-Coat Preconstruction or Prefabrication Painting Systems 1. Scope 1.1 This guide covers those shop primers used in today’s modern commercial shipyards for preconstruction and prefabrication priming of abrasive blast cleaned structural steel and steel plates. To maximize efficiency
Read More »
Guide to Zinc-Rich Coating Systems
Zinc-Rich Coating Systems SSPC Coating System Guide 12.00 – Guide to Zinc-Rich Coating Systems 1. Scope 1.1 This guide provides general information on the description, selection, and application of zinc-rich coating systems as well as the selection and application (including surface preparation) of topcoats. 1.2 Zinc-rich coatings as referenced in
Read More »
White Metal Blast Cleaning
Guidelines on White Metal Blast Cleaning Joint Surface Preparation Standard SSPC-SP 05/NACE NO.01 – White Metal Blast Cleaning This The Society for Protective Coatings (SSPC)/NACE International (NACE) standard represents a consensus of those individual members who have reviewed this document, its scope, and provisions. It is intended to aid the
Read More »
Surface Preparation of Concrete
What are the Surface Preparation for Concrete? Joint Surface Preparation Standard SSPC-SP 13/NACE NO.06 – Surface Preparation of Concrete This SSPC: The Society for Protective Coatings/NACE International (NACE) standard represents a consensus of those individual members who have reviewed this document, its scope, and provisions. It is intended to aid
Read More »
