Industrial Rust Inhibitive Rust Bullet Coating Rust Bullet Specifications for Surface Preparation & Paint Application on New & Uncoated Steel The Product Data Sheet (PDS) and Material Safety Data Sheet (MSDS) are integral part of these instructions. Material should not be handled or used without reading and understanding this information.
Read More »
surface preparation
Wet Abrasive Blast Cleaning – Joint Technical Report
What is Wet Abrasive Blast Cleaning? Wet Abrasive Blast Cleaning: An SSPC and NACE Joint Technical Report SSPC: The Society for Protective Coatings (SSPC) and NACE International (NACE) issue this report in conformance with the best current technology regarding the specific subject. This report represents a consensus of those individual
Read More »
Standard Procedure for Evaluating Qualifications of Shop Painting Applicators
What are Shop Painting Applicators? Qualification Procedure No. 3 – Standard Procedure for Evaluating Qualifications of Shop Painting Applicators 1. Scope 1.1 This standard procedure describes a method for evaluating the qualification of shop painting applicators whose primary function is to provide surface preparation and protective coating application services. However, the
Read More »
Procedure for Evaluating Painting Contractors With Limited Industrial Work Experience
Evaluation of Painting Contractors With Limited Industrial Work Experience Qualification Procedure No. 7 – Procedure for Evaluating Painting Contractors With Limited Industrial Work Experience 1. Scope 1.1 The procedure describes a method for evaluating the qualifications of field painting contractors and contracting firms with less than 6 months industrial painting
Read More »
Guide for Selecting Oil Base Painting Systems
The Oil Base Painting Systems Painting System Guide No. 1.00 – Guide for Selecting Oil Base Painting Systems Most needs for oil base painting systems can be met by the standard SSPC Painting Systems 1.04 and 1.09 through 1.13 in this section. Other combinations of surface preparation, primers, intermediates, and
Read More »
Guide to Topcoating Zinc-Rich Primers
How To Topcoat Zinc-Rich Primers Painting System Guide No. 8.00 – Guide to Topcoating Zinc-Rich Primers 1. Scope 1.1 This guide covers the selection and application (including surface preparation) of topcoats to surfaces coated with a zinc-rich primer. Both organic and inorganic zinc-rich primers are included. 1.2 The guide does
Read More »
Guide for Selecting Painting Systems for Topsides
Painting Systems for Topsides Painting System Guide 21.00 – Guide for Selecting Painting Systems for Topsides 1. Scope 1.1 This guide covers painting systems for the protection of the topside or exterior area of steel ships. This includes the area from the deep load line to the rail, more commonly
Read More »
Four-Coat Oil Base Zinc Oxide Painting System (Without Lead or Chromate Pigment)
Oil Base Zinc Oxide Painting System Painting System No. 1.10 – Four-Coat Oil Base Zinc Oxide Painting System (Without Lead or Chromate Pigment) 1. Scope 1.1 This specification covers an oil base, lead- and chromate-free painting system for steel cleaned with hand or power tools. 1.2 This system is suitable
Read More »
Guide for Selecting Alkyd Painting Systems
What are Alkyd Painting Systems? Painting System Guide No. 2.00 – Guide for Selecting Alkyd Painting Systems Combinations of surface preparation, primers, intermediates, and topcoats may be selected for special situations for alkyd painting systems using the following Guide. To do so, select the desired surface preparation, primer, intermediate(s), and
Read More »
Zinc Dust Sacrificial Primer, Performance-Based
On Zinc Dust Sacrificial Primer PAINT SPECIFICATION NO. 29 – Zinc Dust Sacrificial Primer, Performance-Based 1. Scope 1.1 This specification covers highly pigmented primers that contain zinc dust as the major pigment component (minimum 65% by weight in the dry film) and are defined by their ability to protect ferrous
Read More »
