One Coat Zinc-Rich Painting System Specification PAINTING SYSTEM NO. 12.01 – One Coat Zinc-Rich Painting System 1. Scope 1.1 This specification covers a one-coat zinc-rich painting system to be used on carbon steel in mild to moderately severe environments and corrosive marine atmospheric environments (see Note 10.1). 1.2 Zinc-rich coatings,
Read More »
Rust Protection News
Hot-Applied Coal Tar Enamel Painting System
What is a Coal Tar Enamel Painting System PAINTING SYSTEM NO. 10.01 – Hot-Applied Coal Tar Enamel Painting System 1. Scope 1.1 This specification covers a hot-applied coal tar painting system for underground and underwater steel structures, consisting of a primer and two hot-applied coats. 1.2 This system is suitable
Read More »
Latex Painting System for Industrial and Marine Atmospheres, Performance-Based
Latex Painting System for Industrial and Marine Atmospheres PAINTING SPECIFICATION NO. 24.00 – Latex Painting System for Industrial and Marine Atmospheres 1. Scope 1.1 This specification covers a painting system for steel surfaces based on multiple coats of air-drying, single-component latex paints having a total dry film thickness of a
Read More »
Weld-Through Inorganic Zinc Primer
Inorganic Zinc Primers PAINT SPECIFICATION NO. 30 – Weld-Through Inorganic Zinc Primers 1. Scope 1.1 This specification covers a group of inorganic zinc primers that can protect carbon steel during the fabrication process, permit welding to specification requirements, and be over-coated. 1.2 The major pigment component in this coating is
Read More »
Water-Borne Epoxy Topcoat for Steel Surfaces
Water-Borne Epoxy Topcoat PAINT SPECIFICATION NO. 34 – Water-Borne Epoxy Topcoat for Steel Surfaces 1. Scope 1.1 This specification covers an ambient-cured, two-component water-borne epoxy coating that is intended for use as a finish coat in multicoat water-borne epoxy systems for steel. 1.2 Topcoats are categorized according to performance levels
Read More »
Water-Borne Epoxy Primer for Steel Surfaces
Water-Borne Epoxy Primer PAINT SPECIFICATION NO. 28 – Water-Borne Epoxy Primer for Steel Surfaces 1. Scope 1.1 This specification covers an ambient temperature curing, two-component water-borne epoxy coating for steel that is intended for use as a primer of a multicoat water-borne epoxy or other coating system. 1.2 Primer coatings
Read More »
