Inorganic Zinc Primers PAINT SPECIFICATION NO. 30 – Weld-Through Inorganic Zinc Primers 1. Scope 1.1 This specification covers a group of inorganic zinc primers that can protect carbon steel during the fabrication process, permit welding to specification requirements, and be over-coated. 1.2 The major pigment component in this coating is
Read More »
Technical
Water-Borne Epoxy Topcoat for Steel Surfaces
Water-Borne Epoxy Topcoat PAINT SPECIFICATION NO. 34 – Water-Borne Epoxy Topcoat for Steel Surfaces 1. Scope 1.1 This specification covers an ambient-cured, two-component water-borne epoxy coating that is intended for use as a finish coat in multicoat water-borne epoxy systems for steel. 1.2 Topcoats are categorized according to performance levels
Read More »
Water-Borne Epoxy Primer for Steel Surfaces
Water-Borne Epoxy Primer PAINT SPECIFICATION NO. 28 – Water-Borne Epoxy Primer for Steel Surfaces 1. Scope 1.1 This specification covers an ambient temperature curing, two-component water-borne epoxy coating for steel that is intended for use as a primer of a multicoat water-borne epoxy or other coating system. 1.2 Primer coatings
Read More »
Waterborne Epoxy Coating for Cementitious Substrates Performance-Based
Waterborne Epoxy Coating PAINT SPECIFICATION NO. 37 – Waterborne Epoxy Coating for Cementitious Substrates Performance-Based 1. Scope 1.1 This specification covers the requirements for an ambient temperature cure, two-component waterborne epoxy coating that is intended for use as a coating for concrete. 1.2 Coatings meeting this specification are suitable for
Read More »
Solvent Cleaning
Know What Solvent Cleaning Is SURFACE PREPARATION SPECIFICATION NO. 01 – Solvent Cleaning 1. Scope 1.1 This specification covers the requirements for the solvent cleaning of steel surfaces. 2. Definition 2.1 Solvent cleaning is a method for removing all visible oil, grease, soil, drawing and cutting compounds, and other soluble
Read More »
Power Tool Cleaning To Bare Metal
What is Power Tool Cleaning? SURFACE PREPARATION SPECIFICATION NO.11 – Power Tool Cleaning To Bare Metal 1. Scope 1.1 This standard covers the requirements for power tool cleaning to produce a bare metal surface and to retain or produce a minimum 25 micrometer (1.0 mil) surface profile. 1.2 This standard
Read More »
Power Tool Cleaning
Surface Preparation by Power Tool Cleaning SURFACE PREPARATION SPECIFICATION NO.03 – Power Tool Cleaning 1. Scope 1.1 This standard covers the requirements for power tool cleaning of steel surfaces. 2. Definition 2.1 Power tool cleaning is a method of preparing steel surfaces by the use of power assisted hand tools.
Read More »
Pickling
How To Perform Pickling on Steel Surfaces SURFACE PREPARATION SPECIFICATION NO.08 – Pickling 1. Scope 1.1 This specification covers the requirements for the pickling of steel surfaces. 2. Definition 2.1 Pickling is a method of preparing steel surfaces by chemical reaction, electrolysis, or both. The surfaces when viewed without magnification
Read More »
Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel
SSPC-CS 23.00/AWS C2.23M/NACE No. 12 – Thermal Spray Coatings Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel This SSPC – The Society for Protective Coatings/American Welding Society (AWS)/NACE International (NACE) standard represents a consensus of those individual members who have
Read More »
Three-Coat Latex Painting System
Applying Three-Coat Latex Painting System PAINTING SYSTEM NO. 18.01 – Three-Coat Latex Painting System 1. Scope 1.1 This specification covers a complete latex painting system for structural steel. 1.2 This painting system is suitable for use on parts or structures exposed in Environmental Zones 1A (interior, normally dry), and 1B
Read More »
