Evaluation of Painting Contractors With Limited Industrial Work Experience Qualification Procedure No. 7 – Procedure for Evaluating Painting Contractors With Limited Industrial Work Experience 1. Scope 1.1 The procedure describes a method for evaluating the qualifications of field painting contractors and contracting firms with less than 6 months industrial painting
Read More »
Archives for August 2010
Commentary On Qualification Procedures
What are these Qualification Procedures? Be Familiar with SSPC’s Qualification Procedures 1. History of the Standards of Qualification Procedures This commentary is for information only and is not part of SSPC-QP 1, QP 2, QP 3, QP 4, QP 5, QP 6, or QP 8. SSPC currently develops six types
Read More »
Guide for Selecting Painting Systems for Ship Bottoms
Painting Systems for Ship Bottoms Painting System Guide 19.00 – Guide for Selecting Painting Systems for Ship Bottoms 1. Scope 1.1 This guide covers painting systems for ship bottoms from the keel to the light load line on steel ships. The area from the light load line to the deep
Read More »
Guide for Selecting Painting Systems for Boottoppings
Painting Systems for Boottoppings Painting System Guide No. 20.00 – Guide for Selecting Painting Systems for Boottoppings 1. Scope 1.1 This guide covers painting systems for the protection of the exterior boottop areas (the area from the light load line to the deep load line) of steel ships. It should
Read More »
Guide for Selecting One-Coat Shop Painting Systems
What are One-Coat Shop Painting Systems? Painting System Guide 7.00 – Guide for Selecting One-Coat Shop Painting Systems There are no standard one-coat shop painting systems; however, by using the following Guide a painting system may be selected by the specifier. Select the desired surface preparation and primer from those
Read More »
Guide for Selecting One-Coat Preconstruction or Prefabrication Painting Systems
One-Coat Preconstruction/Prefabrication Painting Systems Painting System Guide 22.00 – Guide for Selecting One-Coat Preconstruction or Prefabrication Painting Systems 1. Scope 1.1 This guide covers those shop primers used in today’s modern commercial shipyards for preconstruction and prefabrication priming of abrasive blast cleaned structural steel and steel plates. To maximize efficiency
Read More »
Guide for Selecting Oil Base Painting Systems
The Oil Base Painting Systems Painting System Guide No. 1.00 – Guide for Selecting Oil Base Painting Systems Most needs for oil base painting systems can be met by the standard SSPC Painting Systems 1.04 and 1.09 through 1.13 in this section. Other combinations of surface preparation, primers, intermediates, and
Read More »
Guide to Zinc-Rich Coating Systems
Zinc-Rich Coating Systems SSPC Coating System Guide 12.00 – Guide to Zinc-Rich Coating Systems 1. Scope 1.1 This guide provides general information on the description, selection, and application of zinc-rich coating systems as well as the selection and application (including surface preparation) of topcoats. 1.2 Zinc-rich coatings as referenced in
Read More »
Guide to Topcoating Zinc-Rich Primers
How To Topcoat Zinc-Rich Primers Painting System Guide No. 8.00 – Guide to Topcoating Zinc-Rich Primers 1. Scope 1.1 This guide covers the selection and application (including surface preparation) of topcoats to surfaces coated with a zinc-rich primer. Both organic and inorganic zinc-rich primers are included. 1.2 The guide does
Read More »
Guide for Selecting Vinyl Painting Systems
What are Vinyl Painting Systems? Painting System Guide 4.00 – Guide for Selecting Vinyl Painting Systems Most needs for vinyl painting systems can be met by the standard SSPC Painting Systems 4.02 and 4.04 in this section. Other combinations of surface preparation, primer, intermediates, and topcoats may be selected for
Read More »
