Rust Bullet Australasia

Rust Bullet Automotive

Chassis rust paint that goes straight over rust

For ute, 4WD, truck and trailer chassis. Wire off the loose rust, then brush or spray two coats of Rust Bullet Automotive straight over what is left. No primer, no topcoat needed.

  • Ute & 4WD chassis
  • Trailer chassis
  • Underbody & floor pans
  • Suspension & diffs
  • Restoration projects
Choose your formula · from A$135

Shipped Australia-wide from A$32 · Questions: 0415 168 902

Rust Bullet coating applied over rusted metal
Over rustCoats directly over rusted, clean and new metal
Two coatsAbout 37 m² per coat from a 3.76 L can
No topcoatUV resistant; a topcoat is optional
One partNothing to mix: brush, roll or spray

Pick your chassis paint

Both formulas coat straight over rust and are UV resistant. Two coats is the standard job.

Rust Bullet Industrial (Gold) can

Industrial (Gold)

Gates, trailers, sheds, roofs, farm, marine and machinery

The original Rust Bullet formula for home, farm, marine, industrial and commercial jobs. Brush, roll or spray. Also bonds to concrete, wood and fibreglass. Metallic grey.

946 ml A$135Add to cart
3.76 L A$445Add to cart

946 ml + Solvent · A$170

Full product details
Shipping, Australia-wide, by weight: up to 5 kg A$32 · up to 10 kg A$40 · up to 20 kg A$60 · up to 30 kg A$80. The cart shows the exact price before you pay.

How much do I need?

Measure length × width of each surface you will coat and add them up.

How to paint a chassis over rust

  1. Clean off the loose stuffWire-brush flaking rust, scale and old loose paint. Remove grease and oil. Metal Blast cleans and etches the surface for a better bond (optional).
  2. First coat straight over the rustBrush, roll or spray a thin coat directly over the remaining rust. It soaks into the rusted surface rather than sitting on top.
  3. Second coatApply the second coat once the first has set, as the application guidelines describe. Two coats is the standard job.
  4. Topcoat if you want a colourRust Bullet is UV resistant and metallic grey, so a topcoat is optional. For a colour, wait 24–48 hours after the final coat.

Read the full application guidelines

Prep and clean-up

Metal Blast 709 ml spray

Metal Blast 709 ml spray 709 ml

Cleans grease and surface rust and etches bare metal before coating.

A$54Add
Rust Bullet Solvent

Rust Bullet Solvent 0.95 L

For clean-up of brushes and spray gear, and thinning for spraying.

A$35Add
Rapid Fire Accelerator

Rapid Fire Accelerator 189 ml

Accelerator for spray jobs: shortens the wait between coats.

A$135Add
White Shell topcoat

White Shell topcoat 946 ml

White finishing coat over two coats of Rust Bullet.

A$135Add

Before you buy

Chassis rust paint: questions

Can I put chassis paint straight over rust?

Yes. Rust Bullet is made to coat directly over rusted metal as well as clean and new metal. Remove loose, flaking rust and grease first; you do not need to take it back to bare metal.

Do I need a primer?

No etching primer is needed: Rust Bullet bonds directly to rusted and clean metal. For bare shiny metal, Metal Blast cleans and etches the surface first.

Do I need a topcoat?

No. Rust Bullet is UV resistant, so a topcoat is optional. It dries metallic grey. If you want a colour, apply your topcoat 24–48 hours after the final coat.

Which Rust Bullet is best for a chassis?

Automotive (Silver) for vehicles, chassis and underbody, especially if you spray. Industrial (Gold) for gates, trailers, sheds, roofs, farm, marine and machinery. Both go straight over rust and both are UV resistant.

How much do I need?

A 3.76 L can covers about 37 m² per coat, so about 18 m² with the standard two coats. A 946 ml can covers about 4.5 m² with two coats. Use the calculator above for your job.

Can I spray it?

Yes. Brush, roller or spray equipment all work. Automotive (Silver) is a little thinner and sprays well through HVLP guns. Solvent is used for clean-up.

What does shipping cost?

By weight, Australia-wide: up to 5 kg A$32, 5–10 kg A$40, 10–20 kg A$60, 20–30 kg A$80. A 946 ml can plus solvent ships for A$32. The cart shows the exact price before you pay.

Who am I buying from?

Rust Bullet Australasia, Buderim QLD, the Australian distributor of Rust Bullet coatings. Questions before you buy: call 0415 168 902 or email info@rustbullet.com.au.