One-Coat Oil Base Slow Drying Maintenance Painting System
PAINTING SYSTEM NO. 1.13
1.1 This speciﬁcation covers a one-coat oil base, lead- and chromate-free painting system for steel cleaned with hand or power tools.
1.2 This system is suitable for use on parts or structures exposed in Environmental Zone 1A (interior, normally dry) and Zone 1B (exterior, normally dry).
1.3 This system is never used as a shop coat because of its very long drying time. It is unsuitable for use where the slow drying, slippery paint ﬁlm would be dangerous to workmen when walking or climbing on painted surfaces.
2.1 This painting system consists of surface preparation by solvent cleaning and hand or power tool cleaning and one coat of slow drying linseed oil maintenance primer.
3. Referenced Standards
3.1 The latest issue, revision, or amendment of the referenced standards in effect on the date of invitation to bid shall govern, unless otherwise speciﬁed.
3.2 If there is a conﬂict between the requirements of any of the cited referenced standards and this speciﬁcation, the requirements of this speciﬁcation shall prevail.
3.3 SSPC STANDARDS AND JOINT STANDARDS:
PA 1 Shop, Field, and Maintenance Painting of Steel
PA 2 Measurement of Dry Coating Thickness with Magnetic Gages
PA Guide 4 Guide to Maintenance Repainting with Oil Base or Alkyd Painting Systems
Paint 26 Slow-Dying Linseed Oil Black Maintenance Primer (Without Lead and Chromate Pigments)
SP2 Hand Tool Cleaning
SP5/ NACE No 1
PAINTING SYSTEM NO. 1.13 – One Coat Oil-Base Slow Drying Maintenance Painting System (Without Lead or Chromate Pigments)