Rust Proof Paints Australia

It is important to find good quality rust proof paints that are reasonably priced. Rust Bullet Australasia has a comprehensive range of products in their shop for rust prevention of all metals and steel surfaces.

Rust Bullet products offer a superior coating to prevent rust on all surfaces. Understanding the different stages of rust build up, what the signs of corrosion are takes a lot of research.

Rust Bullet Australasia has vast knowledge of these stages and have the products to prevent this. Rust Bullet’s Superior Patented Technology permanently stops rust and corrosion.

Products for Rust Proofing 

The cost of corrosion is considerable worldwide. This could be saved with a corrosion management system put in place in building projects for preventative rust proofing.

In Australia we have a climate conducive to have rust build up very quickly if not controlled. Within our Marine industry, Automotive, Home and Farm, Industrial and Concrete projects there is a lot of metal.

Rust Bullet Australasia have products to stop rust permanently. If this rust proofing paint is applied early and correctly it can slow the corrosion down and prevent the rust forming.

Rust Paint Application 

Once these products have been purchased, the big job is how to carry out the application of these paints. The products will come with guidelines which need to be read thoroughly before use. 

In preparation for cleaning, these surfaces should be free of any flakes of old rust and paint. This can be scraped, or wire brushed off.  

There are different products for cleaning to remove any dirt, rust, and grease, then conditioning the surface. It is best to refer to all instructions and follow the procedures. 

Once cleaned the surface must be completely dry. This will prepare all metal and steel surfaces for the application of the paint.

Safety Procedure Rust Proof Paints 

There are paints for different rust proof issues. Depending on what the issue is and which product you purchase, they will all come with a safety procedure.  

PPE gear is advised to be worn. This includes protective clothing, gloves, safety glasses and a mask.  It is recommended to carry out this work in a well-ventilated area away from open flames.

A risk assessment can be carried out to ensure there is no heating factors, cigarettes, or all possible traces of ignition. 

Storage Protection 

Once the rust proofing has been applied protect the machinery, car, boat as best you can. Storage for these objects and equipment should be arranged and in the long run will save you time and energy.  

If they can be stored and be fully protected from precipitation, heat, and wind as much as possible this will help with preserving the rust proofing. Even wind contains an erosive element that can slowly reduce the paint and other rust prevention you have applied to your surfaces.

By protecting the surfaces against the UV rays of the sun and the heat, you can maintain the paint better. This is where a well-maintained storage shed will protect the machinery and the protection lasts longer.

Investment protection

Cars, Boats, Farm machinery, building equipment, sheds are not just a purchase, they are an investment. Protecting your investment in Australia starts by employing the appropriate rust proofing.

Be sure to paint your equipment to provide that first layer of protection. And follow-up with the right cleaning, storage, and using techniques that limit the chances of rust doing damage to your equipment.

Rust Bullet Australasia has products to prevent rust build up. Contact the team on 0415 168 902 they can answer all your questions.